EPEVER SOLAR Demand CONTROLLER Set up: TRACER AN Sequence CONTROLLE

EPEVER SOLAR Demand CONTROLLER Set up: TRACER AN Sequence CONTROLLE

Blog Article

The EPEVER Tracer AN Series Solar Cost Controller is usually a very successful photo voltaic controller designed for off-grid solar methods. Determined by multiphase synchronous rectification technology, it ensures optimized Power conversion and program balance for a wide array of photovoltaic (PV) apps.

Critical Options from the EPEVER Tracer AN Collection Controller
The Tracer AN sequence makes use of EPEVER Solar Demand Controller technology for top-quality photo voltaic Power harvesting. Critical attributes include things like:

Multiphase Synchronous Rectification (MSR) for improved Strength conversion.
Advanced MPPT Algorithm with >99% effectiveness.
Dual-Phase Charging for Improved battery daily life.
Liquid crystal display Display screen with serious-time details checking.
Many Load Regulate Modes which include guide and timer.
Thorough Electronic Protections towards overcharging, more than-discharging, brief circuits, and reverse polarity.
Step-by-Move Guideline to Starting the EPEVER Tracer AN Collection Controller
1. Unboxing and Getting ready the Controller
Make sure all components are bundled: Tracer AN device, temperature sensor, conversation cables, and user handbook.
Validate the design amount and voltage ratings match your photo voltaic panel and battery technical specs.
two. Mounting the Charge Controller
Select a well-ventilated, dry locale near to the battery financial institution.
Secure the Tracer AN controller utilizing the furnished mounting brackets.
Keep appropriate clearance for heat dissipation.
3. Wiring the Photo voltaic Cost Controller
Caution: Normally observe suitable security protocols and ensure the process is driven off just before connecting components.

Step one: Link the battery terminals towards the demand controller (constructive to optimistic, negative to destructive).
Phase 2: Connect the photo voltaic panel array for the PV input terminals.
Move 3: Connect the load terminals if employing a direct load relationship.
Action 4: Double-Look at all connections for polarity and tightness.
four. Configuring the Controller Settings
Electrical power around the controller visit here by connecting the battery to start with.
Make use of the LCD display to navigate the configurations menu.
Configure:
Battery Sort: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Control Modes: Handbook, timer, mild Command.
five. Checking and Information Logging
The Tracer AN Collection supports actual-time checking utilizing the MT50 remote meter.
Facts could be logged via the RS485 conversation port utilizing software for example Solar Station Computer system.
Remote checking is feasible with the EPEVER WiFi module.
six. Troubleshooting Common Difficulties
Problem one: No Energy Output

Test battery voltage and connections.
Verify PV panel voltage exceeds battery voltage.
Challenge 2: About-Voltage Protection

Validate the solar array’s voltage score.
Adjust technique parameters if necessary.
Situation 3: No Battery Charging

Inspect PV wiring for continuity.
Validate MPPT configurations inside the menu.
Great things about the Tracer AN Series with MSR Know-how
The multiphase synchronous rectification technologies makes certain:

Greater Effectiveness: Decreased Electricity losses throughout conversion.
Improved Reliability: Secure efficiency beneath variable loads.
Extended Battery Daily life: Dependable and correct charging profiles.
Summary
The EPEVER Photo voltaic Demand Controller with multiphase synchronous rectification technology is really an Outstanding option for optimizing solar energy generation and lengthening battery everyday living. By subsequent the above mentioned set up guide, consumers can assure maximum effectiveness and process longevity.